Hi,
I am working on CRM-RE integration, we configured MD and followed the steps related to Specific Industry RE- .
while executing R3AS ( object - /CRMRE/ROBJ) no data coming and i don't find any bdcos (in smw01) or erros (in smq1, smq2, st22).
after investigation, we found missing record in table CRMSUBTAB (in ERP) for object /CRMRE/ROBJ.
I need anyone to provide me with the assigned FM to /CRMRE/ROBJ in table CRMSUBTAB.
Thanks in advance,
Samer Shamandi
Hi There,
I am not a CRM / middle ware consultant but rather a support personal from ECC, I am investigating a contact person information missing in ECC and found out it relates to a CRM replication issue and seek some guidance.
In CRM's SMW01 we have some BDOCS of type BUPA_REL in error status with below error message.
| Messages for business partner <customer BP>: | XR | 100 |
| No business partners are assigned to contact person 0000000000 | XR | 7 |
Our CRM's customer BP = ECC's customer master's #.
When investigated I found out.
Contact Person BP is related to 6 customer BPs.
In CRM's CRMM_BUT_CONTNO we have 6 entries with all 6 corresponding contact person numbers.
In ECC we have 6 contact persons linked to all 6 customers in KNVK but only 2 entries exist in table CRMPARNR.
on search I found the note 703322 to fix variances between the 2 tables CRMM_BUT_CONTNO & CRMPARNR but when I test & debug this I found its crating missing entries into CRMM_BUT_CONTNO and then only into CRMPARNR but we have CRMM_BUT_CONTNO all good its only CRMPARNR the problematic.
In all such references issues most people refer note 703322 and In some similar posts of this issue people responded to develop a custom report to fix this as there is no other option.
Can some one advise how to approach this, unfortunately we don't have a CRM technical resource available.
Do let me know if you need more info on this, by the way we are on CRM 7.0.
Thanks,
Sai
Dear,
We are facing an issue in CRM where we have incomplete master data tax information for certain materials.
Tax info for country AT, RO en NL is missing.
Materials are created in R/3, first for sales org. 1000.
For sales org 1000 no tax info is required for countries AT, RO and NL as the plants are not linked to this sales area in customizing.
The plants for these countries are linked to another sales org.
When replicating the material to CRM, the tax information (table MLAN) is taken along., but of course without AT, RO and NL.
When extending the materials in R/3 for sales org 4000 for instance, country AT is mandatory and the tax info is completed.
Now we notice that after this replication to CRM, the extra tax information is not available in CRM.
As I am not a CRM consultant, I do not know exactly how the replication to CRM works.
In any way it does not seem logical to me that tax info would only be replicated once?
Can anyone give me some hints on what could be wrong in our setup ?
I want to avoid having to add extra plants to sales org 1000 when there is no business flow for this....
Thank you in advance for your help.
Hi Friends,
I am getting the below bdoc error message in SMW01, please help me on this why it's happening and what kind steps I should follow to resolve this middleware issue. Please help me on this issue.
"Account XXXXX is currently blocked by user XXXXX"
Thanks and Regards,
Venkat
Hi,
I am working on CRM-RE integration, we configured MD and followed the steps related to Specific Industry RE- .
while executing R3AS ( object - /CRMRE/ROBJ) no data coming and i don't find any bdcos (in smw01) or erros (in smq1, smq2, st22).
after investigation, we found missing record in table CRMSUBTAB (in ERP) for object /CRMRE/ROBJ.
I need anyone to provide me with the assigned FM to /CRMRE/ROBJ in table CRMSUBTAB.
Thanks in advance,
Samer Shamandi
Hello Friends,
Can some one please explain the generel explanations about below feilds in SMQS and SMQR transactions. I m not very familier if i have to change these settings. what do below fields mean...
SMQS:
Destination
Max.Conn.
Max. Runtime
W/o tRFC
Scheduler Monitoring
SMQR:
Queue name
Mode
Max. Runtime
USERDEST
Attempts
Pause
Scheduler Monitoring
Thanks for your help!
Regards,
Marry.
Hi Experts,
I created a sales order in CRM, but it is not getting replicated to ECC as getting "Error in system PRDCLNT100 while copying the document" error message in order, if I check the details it showing the message as Jurisdiction code could not be determined (Notification E F2 217) (Message no. CRM_ORDER_MISC 020) and the relevant bdoc is in yellow, if I look at the error message it saying as "The item is not to Invoiced"
Please help me on this issue as what is missing here.
Thanks and Regards,
Venkat
Hi Friends,
This TRFCQDATA is filled with many entries (nearly 1TB), please let me know what is this table, which kind of data it holds and how to clear/delete unusual entries from this table.
Please help me on this table as it's urgent as we getting some performance issues in CRM.
Thanks and Regards,
Venkat
Hi,
We are trying to replicate the BP from CRM to ECC and I see that there are quite a lot of BDoc messages in the error status. The below are the details of the error that we are having:
Error: Partner xxxxxxxxxxxxxxx): the following errors occurred
Warning: Partner data processed with key PartnerGUID 4C03874EA4DC9257E1000000AC141574
Warning: Partner data processed with key PartnerID xxxxxxxxxxxxxx
Error: Business partner with GUID 4C03874EA4DC9257E1000000AC141574 does not exist
Error: Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Please let me know what should I do to fix this. Appreciate your help.
Thanks,
SB
Hi Experts,
I need your help for below issue
In the inbound queue , the entry has 'SYSFAIL' status.
The status_text is ' No mapping function module entered in SMOFSUBTAB'.
Function module is ' BAPI_CRM_SAVE'
Queue name = ' R3AD_BEABILLDOCCRMB'.
How I can check what is the FM used for this.
Can you please help me with this
Thanks
Rahul
Hi Experts,
Need your help with queue stuck with error
Category for service category S046 does not exist'
Thanks
Rahul
Hi Experts,
when a campaign is saved in CRM, a BDoc 'MKTPL_MKTELEM' is triggered by Standard code which reaches ECC and update few standard fields in PS - Project/ WBS element. Now there is a field in CRM Campaign, which exists in the mentioned BDoc message as well. This field value should populate in a Z-field at WBS element.
Question is, where to map these fields? How does ECC knows which field of BDoc message should be populated to a field in WBS element? Is there any FM/Exit/ BADI for this?
Since this is generic question on a standard feature of PS update, you may not need to look into DCM specifically.
Regards,
Dear Gurus ,
I created Transport Request for Organizational Structure of CRM successfully at DEV 100 through Transaction Code: SE38 Execute report RHMOVE30. Then i transport that request successfully to DEV 120 via SCC1. After transport i checked at DEV 120 and i found replication of Org.Structure successfully from 100 to 120.
I lost the Transport Request and now i want to transport to QAS. Can you guide me how i can create re transport request frm DEV or is there any other logic through which i can replicate it to QAS directly.
Please Guide
Thanks
Hi Friends,
I created a sales order in ECC, the same is replicated to CRM, but got some error due to missing shipping conditions in CRM, so I downloaded the shipping conditions using initial load, now I want reload the orders from ECC to CRM, please let me know the steps to set-up request load in R3AR2 and which middleware object should be used to reload the orders from ECC to CRM.
Thanks and Regards,
Venkat
Dear All,
I am creating a prospect from the interaction center the number range for prospect and the contact person needs to be different, I have gone through some posts in SAP SDN
http://scn.sap.com/thread/1973940
As per the last discussion if the number range needs to be different the same can be enabled through configuration
I have made the following configurations
Defined BP Role for Contact Person as Y002(copied from standard)
Assigned the Number range for the contact person (no range is Z5) screen shot attached below
The number range for Z5 lies between- 0009000000-0009999999
Next in the menu path for CRM-Interaction Center Webclient-Master Data-Define Account Identification Profiles I have assigned the BP Role Y002
Screen Shot attached below.
However when I create my lead transaction in CRM Web Ui the number range for the contact person is coming differently it should ideally start from the number range 0009000000-0009999999 mentioned above.
Also when I create the contact person all of the fields are in greyed out mode please advice how to enable these fields.
Kind Regards
Atul
Friends,
We recently upgraded our CRM / ECC DEV systems. We WERE on EHP2/EHP6. Now we are on EHP3/EHP7.
Now, BP replication is failing. We are getting a replication error in SMW01 when making update on a BP in CRM, which means an error when replicating the CRM BP to ECC.
Error Message:
BUTX_FRG0010 403 Tax classification US UTXJ FULL does not exist
We've tried looking at a few notes, but nothing jumps out at us.
We have a message open but don't expect much help there, at least we don't usually....
Effectively with the upgrade there are enhancements as expected, these would include stronger validations.
We may need to get into the Taxation configuration on ECC and get that aligned.
But could anyone give me more detail than that?
Thanks,
NICK
Dear Gurus !!!!
I am facing Problem opening of Customer Account Fact Sheet .
1. If i click on FACT SHEET then i am getting an BSP Error (Refer:FACT SHEET 1)
2. If i click on PDF FACT SHEET then new window gets open with web link but nothing arise even after waiting several minutes. (Refer:FACT SHEET 2)
3. I also tried Configuration of Fact Sheet through T code: BSP_WD_CMPWB and Open the CRM Web UI Component ‘BSP_DLC_FS’. Select the Standard Fact Sheet ‘BP_ACCOUNT_FS’ from the drop down but after that i get error "
ERROR: SQL error 1105 while accessing program ~L_O246BB4RXBLRZI1L9FZLFUSZ7ADHPC part LOAD. (termination: RABAX_STATE)
(Refer:FACT SHEET 3)
Please refer all enclosed files and guide me how i can get access over Fact Sheet . Z that seems as configuration issue or any networking . Please guide me
Thanks
Dear Gurus ,
I created Transport Request for Organizational Structure of CRM successfully at DEV 100 through Transaction Code: SE38 Execute report RHMOVE30. Then i transport that request successfully to DEV 120 via SCC1. After transport i checked at DEV 120 and i found replication of Org.Structure successfully from 100 to 120.
I lost the Transport Request and now i want to transport to QAS. Can you guide me how i can create re transport request frm DEV or is there any other logic through which i can replicate it to QAS directly.
Please Guide
Thanks
Hello ALL,
How / Where do i get all the authorisation objects for a Transaction?
for eg, commpr01 transaction ,what are the Auth.Objects for this?
I know that COM_ASET,COM_IL,COM_PRD,COM_PRD_CT are the Authorisation Objects for commpr01,where do i get these...where and how to look ?
Thnaks + Regards
Arshad
Edited by: arshad ahmed on Oct 29, 2009 1:33 AM
Hi Gurus,
i want to change message type "error(red)" to "warning (yellow)".
Instead of error message in transaction or master data for anything (incomplete field or pdp or org data detm.) i want it to be just warning(yellow) or no error(red) at all.
and can such transactions or master data with warning message be processed further(replicated) to ECC6.0.
how can i do this at functional level.
please help me with this..
Thanks,
G